ltechnologygroup.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
In May of 2016, Mandiant’s Red Team discovered a series of
vulnerabilities present on Lenovo’s Vibe P1 Android-based mobile
device that allow local privilege escalation to the user “root”.
Mandiant disclosed these vulnerabilities to Lenovo in May of 2016.
Lenovo advised Mandiant that it should work with Motorola, who it had
acquired and was now responsible for Lenovo’s mobile product
portfolio. Mandiant then disclosed the vulnerabilities to Motorola for
correction. The vulnerabilities discovered by Mandiant’s Red Team were
- Local backups enabled in Lenovo “Security” application
- Local backups enabled in Lenovo “Idea Friend”
- Improper access controls in
“nac_server” binary (CVE-2017-3748)
Lenovo advisory that includes the affected devices and software
versions can be found on Motorola’s website. Motorola has indicated
that these vulnerabilities have since been patched, and the company
supported Mandiant regarding the release of this post.
We have provided general details in an FAQ, and a technical analysis
of the vulnerabilities follows.
What devices are affected and (potentially) how many devices are affected?
The vulnerabilities described in this post affect a subset of
Lenovo-branded devices. A full list of the affected devices can be
found within Motorola’s
official advisory. Note that the vulnerabilities described in
this post do not affect the Android Open Source Project (“AOSP”)
developed by Google.
How is the issue being addressed?
Motorola has redesigned the affected mechanism to use a more secure process.
How would an attacker exploit these vulnerabilities?
The described exploit chain requires local, physical access to a
device. Therefore, is very unlikely to see this exploit “in the wild”.
Users are recommended to update their devices to the most recent
software package provided by Lenovo, and protect their devices using
strong lock screen settings.
Who discovered these vulnerabilities?
Jake Valletta (@jake_valletta)
Now we will walk through the exploitation process Mandiant’s Red
Team used to obtain code execution as the user “root” by chaining the
disclosed vulnerabilities together in a unique way.
Identifying Our Target: “nac_server”
A popular process for escalating privileges on Android devices is to
enumerate locally listening sockets. While AF_INET sockets (think IP
addresses and TCP/UDP ports) listening locally are rare on Android
devices, AF_UNIX sockets (hereforth refered to as “UNIX sockets”) are
used frequently by native Android daemons, including “netd”,
“installd”, and “vold”, most of which run with elevated privileges.
UNIX sockets are represented as files on the filesystem, and are
typically bound to socket-type files in the “/dev/socket/” directory.
A specific subset of UNIX sockets bind to the abstract namespace
(which are not bound to a filesystem-backed file), and are denoted
with a leading ‘@’ character, such as “@android:debuggerd32” and “@jdwp-control”.
Using the “netstat” module of the “busybox” utility on a test
Vibe, we can note interesting abstract sockets that do not appear to
be part of the Android Open Source Project (“AOSP”), as highlighted in
Figure 1. Note that we’ll be using the Android Debug Bridge (“adb”) to
interface with a test Lenovo Vibe throughout the post.
Figure 1: Abstract sockets on test Lenovo
To find the binary that may be responsible for these UNIX sockets, a
string search across all DEX bytecode and binaries on the device can
be useful. A string search across system binaries (located on the
device in the directories “/system/bin/”, “/vendor/bin/”, and
“/system/xbin/”) indicated that the strings “nac_server”,
“nac_safe_server”, and “supercmdlocalsocket” were all present in the
binary file “/system/bin/nac_server”, a non-AOSP binary.
To confirm this, we can extract and view the “/init.rc” file present
on the Vibe. In this file, we can see that Lenovo added an init
service called “nac_server”, shown in Figure 2.
Figure 2: “nac_server” service defined in
The “init” process registers the “nac_server” service and runs as
the user “root” at system boot. We can confirm this by checking the
“init.svc.nac_server” system property and by viewing the running
processes on a test device, shown in Figure 3 and Figure 4
respectively. It is also important to note that the “nac_server”
binary was running under the SE for
Android (“SEAndroid”) context “nac_server”.
Figure 3: Checking “init.svc.nac_server”
Figure 4: “nac_server” process running as
“root” user and “nac_server” SEAndroid context
Since we know this process runs as a privileged process and listens
on UNIX sockets, we shifted our analysis to the “nac_server” binary to
understand its full capabilities.
Binary Analysis of the “nac_server”
To map out the capabilities of the “nac_server” binary, Mandiant’s
Red Team worked along side FireEye Labs Advanced Reverse Engineers
(“FLARE”) (shoutout to @m_r_tz). As stated above, the
“init” process starts “/system/bin/nac_server” at system boot as the
user “root”. Once started, “nac_server” spawns three threads, each
bound to an abstract UNIX socket: “nac_server”, “nac_safe_server”, and
“supercmdlocalsocket”. Each of these threads expects to receive a file
path from a client across the socket. “nac_server” then performs the
following security checks based on the file path:
- Tokenizes the file path based on “/”, and assumes the third
element is the calling package name, and the fourth argument the
file to execute. The package name is then checked against a
whitelist, shown in Figure 5.
Figure 5: Whitelisted Lenovo-branded
applications in “nac_server”
- Parses the “/data/system/packages.xml” file to check if the
calling package name is installed and the signature matches a list
of internal signatures. One of the allowed signatures is depicted in
Figure 6: Hardcoded package signature in “nac_server”
After validating the file path, “nac_server” copies the file from
the fourth argument to the directory
“/data/local/root_channel/[package_name]”, sets the SEAndroid context
to “root_channel”, and then executes the file using the “system(..)”
function as the user “root”. We’ll be exploring the significance and
capabilities of the “root_channel” SEAndroid context in the following section.
In short, the “nac_server” binary provides a mechanism for
applications signed by Lenovo to execute files as a privileged process
and context. There are obvious malicious reasons to include this
functionality; however, Mandiant’s research suggests that Lenovo used
this functionality to create custom “iptables”
firewall rules from the Android runtime.
Because the “nac_server” falsely assumes the caller is the third
token of the file path, we are able to confuse the service and feed it
a file that we control (CVE-2017-3748).
Understanding SEAndroid Contexts
SEAndroid is a security feature added to Android devices starting in
Android 4.3 (“Jelly Bean”). One of the key reasons for adopting
SEAndroid was to provide granular security control of powerful UIDs
such as those associated with “system”, “radio”, and “root”. Note that
this section will not be a complete tutorial on SEAndroid (a more
comprehensive description of SEAndroid can be found here). The
SEAndroid-related files for our analysis are as follows:
- /sepolicy – Binary kernel policy file loaded at system
- /seapp_contexts – Rules for determining the SEAndroid
domain and type of Android applications
- /etc/security/mac_permissions.xml – x.509 certificate
information to determine the correct domain to apply when the Zygote
process spawns a new application (more information on the Zygote
process can be found here)
“nac_server” UNIX Socket Analysis
Unfortunately for us, attempting to connect to any of the three
aforementioned UNIX sockets as the built-in “shell” user results in
SEAndroid policy violation. Figure 7 shows a “Permission denied” error
when we attempted to connect to the UNIX socket “supercmdlocalsocket”
using the “socat” utility.
Figure 7: Attempting to connect to
“supercmdlocalsocket” abstract socket using “socat”
Figure 8 shows the SEAndroid policy violation captured in the
Android log buffers.
Figure 8: Policy violation included in
Android log buffers
In Figure 8, we see that the operating system denied the source
context “shell”, the “connectto” permission of the
“unix_stream_socket” class for the “nac_server” type. As a researcher,
we now want to know: who can access this permission? To answer
this, we can use the “sesearch” utility as follows:
Figure 9: Performing lookup for
“connectto” permission using “sesearch”
Running this tool indicates that three SEAndroid domains possess the
correct permission: “system_app”, “platform_app”, and
“unconfineddomain”. Fortunately, there are over 100 applications
running in either the “platform_app” or “system_app” security domain.
Based on this, our next goal is to achieve code execution in either
the “system_app” or the “platform_app” domains so that we can connect
to the “nac_server” UNIX sockets.
It is also worth exploring the capabilities of the “root_channel”
SEAndroid context that the “nac_server” binary applies just prior to
executing the command. On the Lenovo Vibe, the “root_channel” context
is quite powerful, and includes full access to application data and
Android runtime and write access to the “/data/” filesystem. What this
context lacks is the ability to mount or remount filesystems and
disable SEAndroid (we will leave this as an exercise for the reader).
Triggering the “nac_server” Bug via Local Backups
Android introduced local backups in Android 2.2 (“Froyo”). Local
backups allow a user with physical access to a device with USB
debugging enabled to download application data for specific
applications and restore this data back to the device. Determination
of whether an application can be backed up is controlled by the
“android:backupAllowed” attribute within an application’s
“AndroidManifest.xml” file. By default, this value is set to “true”
for all applications except applications running as the shared UID “android.uid.system”.
To create a backup of an application locally, we can use the “adb”
command “backup” shown in Figure 10.
Figure 10: Creating a local backup for
the “com.some.app” application using “adb”
These local backups can then be unpacked using the open-source Android
Backup Extractor (“abe”) and the “tar” utility. Since these
backups are not signed, we are free to make changes to the backup,
such as edit configuration files or even add new files entirely. To
repackage the backup, we can reverse the steps and use “tar” (or the
“pax” utility), “abe”,
and finally the “adb” command “restore” to restore the backup on our
device. Figure 11 shows the command to restore a backup.
Figure 11: Restoring new local backup
Abusing Backups Part 1: Code Execution (CVE-2017-3749)
One particularly dangerous side effect of allowing local backups is
that a malicious user can modify an application’s private files
without the application knowing. This typically includes modifying
configuration files to alter the behavior of the application (like
changing your Angry Bird high score data), but in more rare cases, an
attacker can modify supplemental DEX bytecode included as part of an
application to take full control of an application. Note that an
application’s primary DEX bytecode is processed upon installation and
stored outside of the application’s data directory, so it is not a target.
This is the case for the Idea Friend application
(“com.lenovo.ideafriend”), which is the Lenovo-branded contact manager
application. This application did not run as a privileged UID, but it
did run in the “platform_app” SEAndroid domain, shown in Figure 12.
Figure 12: “com.lenovo.ideafriend”
application running in “platform_app” security context
Identifying and Modifying Supplemental Bytecode
If we create a local backup for the Idea Friend application using
the aforementioned process, we will notice the directory “f/parse/”
(which corresponds to “/data/data/com.lenovo.ideafriend/files/parse/”
on a test device) contains 14 signed Java JAR archives, each
containing DEX bytecode, as shown in Figure 13.
Figure 13: JAR archives included in
“f/parse/” directory of Idea Friend backup
The DEX code included in the JAR files “ParseUtilBubble_8.jar” and
“parseUtilMain_8.jar” is loaded dynamically by the Idea Friend
application when launched, which means that if we can modify these JAR
files, we can execute arbitrary code as the Idea Friend application.
These JAR files are signed, which does not permit us to modify the
contents of the archives; however, because our test device utilizes
Runtime (“ART”), the operating system automatically optimizes
DEX bytecode using “dex2oat” to produce an unsigned ELF binary. To
confirm this behavior, we can see two OAT files in the directory
“r/app_outdex” (which corresponds to
“/data/data/com.lenovo.ideafriend/app_outdex/” on a test device).
Figure 14 shows the OAT binaries optimized from the JAR files
“ParseUtilBubble_8.jar” and “parseUtilMain_8.jar” found in the
directory “r/app_outdex/”, and Figure 15 confirms that these are ELF
binaries (the file format used by ART).
Figure 14: Optimized OAT binaries in Idea
Figure 15: Determining file type of ART binaries
Using techniques described in the Black
Hat Asia 2014 white paper “Hiding Behind ART”, it is possible to
create our own OAT ELF binaries given the original DEX bytecode. The
process is summarized as follows:
- Disassemble the existing DEX bytecode. For this, we can use “baksmali”.
- Modify the disassembled DEX bytecode. In our case, we are going
to add a LocalSocket client to connect to the UNIX socket
“supercmdlocalsocket” within a method we know will be called by the
Idea Friend application (keep reading for more on this).
- Reassemble the new DEX. We can use “smali” for
- Push the new DEX bytecode to our device with a filename
that matches the exact length of the destination filename. For
example, if our destination filename is
we need to push a file with the exact filename size of 63, or
This is important for a later step.
- Manually invoke the
“dex2oat” utility on our test device against the DEX bytecode to
generate an optimized OAT file.
- Pull the new OAT binary
from the test device.
- Replace the padded filename (which
corresponds to the “dex_file_location_data” field) in the OAT DEX
file header with the original file path. Note that because we padded
it to the proper length, this will not affect any offsets in the
binary. A text editor such as vim or 010 works here.
the “dex_file_location_checksum” CRC32 checksum in the DEX header to
be that of the original OAT binary. For this, we can use “dexdump”
to obtain the checksum, and “dd” to replace it.
We will use this process in conjunction with a local backup for the
Idea Friend application to connect to one of the UNIX sockets exposed
by the “nac_server” binary. First, we will need to modify one of the
JAR files and insert our malicious code.
Creating the Socket Client
Our first step is to generate the bytecode to connect to one of the
“nac_server”’s abstract UNIX socket. For this example, we have chosen
to use the “supercmdlocalsocket” UNIX socket. We start by creating a
Java class similar to Figure 16.
Figure 16: “run()” method written in Java
to connect to “supercmdlocalsocket” abstract UNIX socket
We can then compile this class, convert the class to DEX bytecode,
and then disassemble using “smali”. Next, we find an opportune
location to place this function.
Inserting the Hook
By performing static and dynamic analysis on the Idea Friend
application, we determined that the Idea Friend application executed
the method “getBubbleViewVersion(..)” of the class
“cn.com.xy.sms.sdk.Iservice.ParseUtilBubble” contained in the JAR
“parseUtilBubble_8.jar” when the application was launched. Knowing
this, we add our malicious code to this class, and insert our hook in
the “getBubbleViewVersion(..)” method, as shown in Figure 17 and
Figure 17: Hook in
“getBubbleViewVersion(..)” to call malicious code
Figure 18: “run()” method written in
disassembled Dalvik to connect to “supercmdlocalsocket”
We can then perform steps 3-8 in the previously described process to
generate our new ELF and restore our modified backup. All that remains
now is to stage our malicious payload to be executed by the
Abusing Backups Part 2: Staging a Payload (CVE-2017-3750)
We know that the Idea Friend application can communicate with the
“nac_server” UNIX sockets, but unfortunately, the Idea Friend
application is not in the whitelist checked by the “nac_server”
binary. This means we will need to find a second application to stage
our payload. By comparing the list of applications in the whitelist of
“nac_server” (Figure 5) against applications that allow local backups,
we can determine a few potential targets. We will use the Lenovo
Security application (“com.lenovo.security”) as our target.
We will first follow the process outlined in the section “Abusing
Backups Part 1: Code Execution” to generate a local backup for the
Lenovo Security application. We then modify the backup to include the
“go.sh” shell script depicted in Figure 19. The “go.sh” script will
simply start a telnet server on TCP port 1234 when executed.
Figure 19: Contents of “go.sh”
After re-packaging and restoring the backup, we can confirm that the
file has been pushed to the device successfully using “ls”:
Figure 20: Successfully pushed “go.sh” to
Lenovo Security application
Chaining the Vulnerabilities
With our chain of vulnerabilities mapped out, we can now trigger the
exploit with the following steps:
- Launch the Settings application and clear the application data
for the Idea Friend application. This removes any legitimate OAT
binaries that may already exist.
- Create a local backup of
the Lenovo Security application.
- Modify the local backup to
contain the “go.sh” payload.
- Restore the modified backup to
- Create a local backup of the Idea Friend
- Modify the local backup to include our malicious
- Restore the modified backup to the device.
- Launch the Idea Friend application. Since the OAT binaries
already exist (and appear valid), the application will execute our
code. This will cause the Idea Friend application to connect to the
UNIX sockets exposed by “nac_server” and pass the file path of our
staged payload, “go.sh”. The “nac_server” will then execute our
payload, starting the telnetd server.
- Connect to the device
using a telnet connection.
Figure 21 depicts this process, and shows the output of the command
“id”, indicating that we have code execution as the user “root”, with
SEAndroid context of “root_channel”.
Figure 21: Running as UID “root” and
“root_channel” SEAndroid context
Platform developers should exercise caution when exposing sensitive
functionality using abstract UNIX sockets. Instead, use file-based
UNIX sockets with the proper filesystem permissions and SEAndroid
policy in conjunction with a privileged Android
System Services to create a more structured and secure model.
Based on follow up analysis, this is the model that Motorola has
decided to use.
In addition, allowing backups on privileged applications can also be
detrimental and should be disallowed. Just because an application is
not running as a privileged Android user ID such as
“android.uid.system”, does not mean that it cannot introduce
vulnerabilities and be used to escalate privileges. Finally,
applications should never allow executable code (Java classes, ELF
binaries, or shared objects) within backups. This can be limited using
At L Technology Group, we know technology alone will not protect us from the risks associated with in cyberspace. Hackers, Nation States like Russia and China along with “Bob” in HR opening that email, are all real threats to your organization. Defending against these threats requires a new strategy that incorporates not only technology, but also intelligent personnel who, eats and breaths cybersecurity. Together with proven processes and techniques combines for an advanced next-generation security solution. Since 2008 L Technology Group has develop people, processes and technology to combat the ever changing threat landscape that businesses face day to day.
Call Toll Free (855) 999-6425 for a FREE Consultation from L Technology Group, https://www.ltechnologygroup.com.