ltechnologygroup.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Network latencies and speed of light
In this short post I’m going to attempt to convince you that current network (Internet) latencies are here to stay, because they are already within a fairly small factor of what is possible under known physics, and getting much closer to that limit – say, another 2x gain – requires heroics of civil and network engineering as well as massive capital expenditures that are very unlikely to be used for general internet links in the foreseeable future.
This is a conversation I’ve had a few times in my life, usually with surprised conversation partners; last year I happened to write a mail about it that I’m now going to recycle and turn into this blog post so that in the future, I can just link to this if it ever comes up again. 🙂
When I originally wrote said mail in October 2017, I started by pinging
csail.mit.edu, a machine that as far as I know (and Geo-IP services are with me on this one) is actually at MIT, so in Cambridge, MA. I did this sitting at my Windows work machine in Seattle, WA, and got this result:
Pinging csail.mit.edu [126.96.36.199] with 32 bytes of data: Reply from 188.8.131.52: bytes=32 time=71ms TTL=48 Reply from 184.108.40.206: bytes=32 time=71ms TTL=48 Reply from 220.127.116.11: bytes=32 time=70ms TTL=48 Reply from 18.104.22.168: bytes=32 time=71ms TTL=48
Ping times are round-trip times and include the time it takes for the network packet to go from my machine to the MIT server, the time it takes for the server to prepare a reply, and the time for said reply to make it back to my machine and get delivered to the running
ping process. The best guess for a single-way trip is to just divide the RTT by 2, giving me an estimate of about 35ms for my ping packet to make it from Seattle to Boston.
Google Maps tells me the great circle distance from my office to Cambridge MA is about 4000km (2500 miles, if a kilometer means nothing to you). Any network packets I’m sending these days over normal network infrastructure are likely to use either optical fiber (especially for long-distance links) or copper cable as a transmission medium. The rule of thumb I learned in university that effective signal transmission speed over both is about 2/3rds of the speed of light in vacuum. This is called the velocity factor; that article has some actual numbers, which work out to 0.65c for Cat-6A twisted pair cable (used for 10Gbit Ethernet), 0.64c for Cat-5e (1Gbit Ethernet), and 0.67c for optical fiber, all of which are close enough to each other and to the aforementioned 2/3c rule of thumb that I won’t bother differentiating between different types of cables in the rest of this post.
Divide our distance of 2500mi by 2/3c, we get about 4×106m / (2×108 m/s) = 2 × 10-2 s = 20ms. That is the transmission delay we would have for a hypothetical optical fiber strung along the great circle between Seattle and Cambridge, the shortest distance between two points on a sphere; I’m neglecting height differences and Earth being not quite spherical here, but I’m only doing a back-of-the-envelope estimate. Note that the actual measured one-way latency I quoted above is already well below twice that. Hence my earlier comment about even a factor-of-2 improvement being unlikely.
Now, if your goal is actually building a network (and not just a single point-to-point link), you don’t want to have long stretches of cable in the middle of nowhere. Again as per Google Maps, the distance from Seattle to Cambridge actually driving along major roads is about 4800km (3000mi). So in this case, we get about 20% extra “overhead” distance from building a network that follows the lay of the land, goes through major population centers, and doesn’t try to tunnel below the Great Lakes or similar. That’s a decent trade-off when your plan is to have an actual Internet and not just one very fast link. So this extra 20% overhead puts our corrected estimate of transmission delay along a more realistic network layout at about 24ms.
That means that of our approximately 35ms one-way trip, 24ms is just from physics (speed of light, index of refraction of optical fiber) and logistics (not having a full mesh of minimum-distance point-to-point links between any two points in the network). The remaining 11ms of the transit time are, presumably, spent with the packets briefly enqueued in some routers, in signal boosters and network stacks. These are the parts that could be improved with advances in network technology. But even reducing that part of the cost to zero still wouldn’t give us even a full 1.5× speed-up. And that’s why I think mainstream network tech isn’t going to get that much faster anytime soon.
What if we are willing to pay up and lay a private dedicated fiber link for that distance (or use some dark fiber going the right direction that’s already there)? That’s still using mainstream tech, just spending money to reduce the fraction of time spent on sub-optimal routing (physical route that is) and in the network, and it seems likely that you could get the RTT to somewhere between 45ms and 50ms using regular fiber if you were willing to spend the money to set it up (and maintain it).
But that’s still assuming using something as pedestrian as fiber (or copper cable), and actually sticking to the surface of the Earth. Going even further along the “money is no object” scale, and edging a teensy bit into Bond Villain territory, we can upgrade our signal velocity to full light speed and also get rid of pesky detours like the curvature of the Earth by digging a perfectly straight tunnel between the two points, keeping a vacuum inside (not strictly necessary, but might as well while we’re at it) and then establishing a really high-powered microwave link; it would have to be to make it along a distance of a few thousand kilometers, given beam divergence. Keeping in theme, such a link would then also be attractive because the transceivers at either end because a sufficiently high-powered microwave transmitter should make for a serviceable death ray, in a pinch. More seriously, high-powered point-to-point microwave links are a thing, and are used in very latency-sensitive applications such as high-frequency trading. However, as far as I know (which might be wrong – feel free to correct me!), individual segments typically span distances of a few miles, not tens of miles, and definitely not hundreds. Longer links are then built by chaining multiple segments together (effectively a sequence of repeaters), adding a small delay on every split, so the effective transmission speed is definitely lower than full speed of light, though I don’t know by how much. And of course, such systems require uninterrupted lines of sight, which (under non-Bond-villain conditions) means they tend to not work, or only work in a diminished capacity, under bad weather conditions with poor visibility.
Anyway, for that level of investment, you should be able to get one-way trip times down to about 12ms or so, and round-trips of around 24ms. That is about 3× faster than current mainstream network tech, and gets us fairly close to the limits of known physics, but it’s also quite expensive to set up and operate, not as reliable, and has various other problems.
- If you have a good consumer/business-level Internet connection, ping someone who does likewise, and there are no major issues on the network in between, the RTTs you will get right now are within about a factor of 3 of the best they can possibly be as per currently known physics: unless we figure out a way around Special Relativity, it’s not getting better than straight-line line-of-sight light-speed communication.
- If you’re willing to spend a bunch of money to buy existing dark fiber
capacity that goes in the right direction and lay down some of your own
where there isn’t any, and you build it as a dedicated link, you should be able to get within 2× of the speed of light limit using fairly mainstream tech. (So about a 1.5× improvement over just using existing networks.)
- Getting substantially better than that with current tech requires
major civil engineering as well as a death ray. Upside: a death ray is its own reward.
At L Technology Group, we know technology alone will not protect us from the risks associated with in cyberspace. Hackers, Nation States like Russia and China along with “Bob” in HR opening that email, are all real threats to your organization. Defending against these threats requires a new strategy that incorporates not only technology, but also intelligent personnel who, eats and breaths cybersecurity. Together with proven processes and techniques combines for an advanced next-generation security solution. Since 2008 L Technology Group has develop people, processes and technology to combat the ever changing threat landscape that businesses face day to day.
Call Toll Free (855) 999-6425 for a FREE Consultation from L Technology Group, https://www.ltechnologygroup.com.